Ip Igmp Robustness - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
The default maximum response time value is 100 tenths of seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a maximum response time interval of one second for
VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp query-max-response-time 10

ip igmp robustness

Use the ip igmp robustness command in Interface Configuration mode to configure the
robustness that allows tuning of the interface, that is, tuning for the expected packet loss on a
subnet. If a subnet is expected to have significant loss, the robustness variable may be increased
for the interface.
Syntax
ip igmp robustnest robustness
no ip igmp robustnest
robustness — Robustness variable. (Range: 1-255)
•
Default Configuration
The default robustness value is 2.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a robustness value of 10 for VLAN 15.
597