Show Ip Igmp; Show Ip Igmp Groups - Dell PowerConnect M6348 Cli Reference Manual

show ip igmp

Use the show ip igmp command in Privileged EXEC mode to display system-wide IGMP
information.
Syntax
show ip igmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide IGMP information.
console#show ip igmp
IGMP Admin Mode................................ Enabled
IGMP Router-Alert check........................ Disabled
IGMP INTERFACE STATUS
Interface Interface-Mode Operational-Status
--------- -------------- ----------------
vlan 3

show ip igmp groups

Use the show ip igmp groups command in Privileged EXEC mode to display the registered
multicast groups on the interface. If detail is specified, this command displays the registered
multicast groups on the interface in detail.
Syntax
show ip igmp groups interface vlan
600
Enabled Non-Operational
vlanid
[detail]