Dell PowerConnect M6348 Cli Reference Manual page 369

lacp auto
Use the lacp auto command to set the LACP (Link Aggregation) mode to dynamic for that Aggregator
Group. This means that when more than one uplink port is in the Group, those uplink ports will be
enabled automatically with dynamic LACP .
Syntax
lacp auto
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command has no user guidelines.
Example
console(config)#port-aggregator group 2
console(config-aggregator-2)#lacp auto
console(config-aggregator-2)#
lacp off
Use the lacp off command to set the LACP (Link Aggregation) mode to off for that Aggregator Group.
This means that when more than one uplink port is in the Group, all the uplinks are shut down except
the lowest numbered one.
Syntax
lacp off
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
369