Show Lldp Med Remote-Device Detail - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show lldp med remote-device detail

Use this command to display detailed information about remote devices that transmit current
LLDP MED data to an interface on the system.
Format
show lldp med remote-device detail <unit/slot/port>
Mode Privileged EXEC
Term Definition
Supported Shows the suppoted capabilities that were received in MED TLV on this port.
Capabilities
Enabled Shows the enabled capabilities that were enabled in MED TLV on this port.
capabilities
Device Class Shows the device class as advertized by the device remotely connected to the port.
Network Policy Shows if network policy TLV is received in the LLDP frames on this port.
Information
Media Shows the application type. Types of applications are unknown, voice, voicesignaling,
Application
guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo,
Type
videosignaling.
VLAN Id Shows the VLAN id associated with a particular policy type.
Priority Shows the priority associated with a particular policy type.
DSCP Shows the DSCP associated with a particular policy type.
Unknown Indicates if the policy type is unknown. In this case, the VLAN id, Priority and DSCP are
ignored.
Tagged Indicates if the policy type is using tagged or untagged VLAN.
Hardware Shows the hardware version of the remote device.
Revision
Firmware Shows the firmware version of the remote device.
Revision
Software Shows the software version of the remote device.
Revision
Serial Number Shows the serial number of the remote device.
Manufacturer Shows the manufacture name of the remote device.
Name
Model Name Shows the model name of the remote device.
Asset ID Shows the asset id of the remote device.
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-190