Show Ip Ospf Interface Stats - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Hello Interval A number representing the OSPF Hello Interval for the specified interface.
Dead Interval A number representing the OSPF Dead Interval for the specified interface.
Retransmit A number representing the OSPF Retransmit Interval for the specified interface.
Interval
Retransmit Delay A number representing the OSPF Transit Delay for the specified interface.
Interval
LSA Ack Interval A number representing the OSPF LSA Acknowledgment Interval for the specified
interface.

show ip ospf interface stats

This command displays the statistics for a specific interface. The information below will only be
displayed if OSPF is enabled.
Format
show ip ospf interface stats <unit/slot/port>
Modes • Privileged EXEC
• User EXEC
Term Definition
OSPF Area ID The area id of this OSPF interface.
Area Border The total number of area border routers reachable within this area. This is initially zero,
Router Count
and is calculated in each SPF pass.
AS Border The total number of Autonomous System border routers reachable within this area.
Router Count
Area LSA Count The total number of link-state advertisements in this area's link-state database, excluding
AS External LSAs.
IP Address The IP address associated with this OSPF interface.
OSPF Interface The number of times the specified OSPF interface has changed its state, or an error has
Events
occurred.
Virtual Events The number of state changes or errors that occurred on this virtual link.
Neighbor Events The number of times this neighbor relationship has changed state, or an error has
occurred.
External LSA The number of external (LS type 5) link-state advertisements in the link-state database.
Count
Sent Packets The number of OSPF packets transmitted on the interface.
Received The number of valid OSPF packets received on the interface.
Packets
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-75