Term
Definition
Outgoing
The list of outgoing interfaces on which the packet
Interface List
is forwarded.
show ipv6 mroute group
This command displays the multicast configuration settings specific to IPv6 such as flags, timer
settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all
the entries in the multicast mroute table containing the given group IPv6 address <group-
address>.
Format
show ipv6 mroute group <group-address> {detail | summary}
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
Protocol
The multicast routing protocol by which this entry was created.
Incoming
The interface on which the packet for this group arrives.
Interface
Outgoing
The list of outgoing interfaces on which this packet is forwarded.
Interface List
show ipv6 mroute source
This command displays the multicast configuration settings specific to IPv6 such as flags, timer
settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all
the entries in the multicast mroute table containing the given source IP address or source IP
address and group IP address pair.
Format
show ipv6 mroute source <source-address> {detail | summary}
Modes
• Privileged EXEC
• User EXEC
IPv6 Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
6-3