Multicast Commands - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

This chapter describes the IP Multicast commands available in the managed switch CLI.
The IP Multicast Commands chapter contains the following sections:
• "Multicast Commands" on page 5-1
• "DVMRP Commands" on page 5-7
• "PIM-DM Commands" on page 5-12
• "PIM-SM Commands" on page 5-16
• "Internet Group Message Protocol (IGMP) Commands" on page 5-26
• "IGMP Proxy Commands" on page 5-35
Warning: The commands in this chapter are in one of two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.

Multicast Commands

This section describes the commands you use to configure IP Multicast and to view IP Multicast
settings and statistics.
IP Multicast Commands
v1.0, July 2009
Chapter 5
5-1