Front Panel Stacking Commands; Show Stack-Port - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Model Identifier The model identifier for the supported switch type.
Switch The description for the supported switch type.
Description

Front Panel Stacking Commands

This section describes the commands you use to view and configure front panel stacking
information.
stack-port
This command sets front panel stacking per port to either stack or ethernet mode.
Default stack
Format
stack-port <unit/slot/port> [{ethernet | stack}]
Mode Stack Global Config

show stack-port

This command displays summary stack-port information for all interfaces.
Format
show stack-port
Mode Privileged EXEC
Term Definition
QOS Mode Front Panel Stacking QOS Mode for all Interfaces.
For Each Interface:
Term Definition
Unit The unit number.
Interface The slot and port numbers.
Stacking Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
2-10