View Lldp-Med Remote Device Information - NETGEAR M4100 Series User Manual

Table 29. LLDP-MED local device information (continued)
Field
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
Location Information: Specifies if the location TLV is present in LLDP frames.
Sub Type
Location Information

View LLDP-MED Remote Device Information


To view LLDP-MED remote device information:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System
M4100 Series Managed Switch
Description
The hardware version.
The Firmware version.
The Software version.
The serial number.
The manufacturers name.
The model name.
The asset ID.
The type of location information.
The location information as a string for a given type of
location ID.
 
LLDP LLDP-MED
Configure System Information

Remote Device Information.
103