Show Sntp Server - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Client Supported Supported SNTP Modes (Broadcast, Unicast, or Multicast).
Modes
SNTP Version The highest SNTP version the client supports.
Port SNTP Client Port.
Client Mode Configured SNTP Client Mode.

show sntp server

This command is used to display SNTP server settings and configured servers.
Format
show sntp server
Mode Privileged EXEC
Term Definition
Server Host IP address or hostname of configured SNTP Server.
Address
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
Server Reference clock identifier of the server for the last received valid packet.
Reference ID
Server Mode SNTP Server mode.
Server Maximum Total number of SNTP Servers allowed.
Entries
Server Current Total number of SNTP configured.
Entries
For each configured server:
Term Definition
Host Address IP address or hostname of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port Server Port Number.
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-39