Show Ipv6 Ospf Abr; Show Ipv6 Ospf Area - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Source Shows source protocol/routes that are being redistributed. Possible values are static,
connected, BGP, or RIP.
Metric The metric of the routes being redistributed.
Metric Type Shows whether the routes are External Type 1 or External Type 2.
Tag The decimal value attached to each external route.
Subnets For redistributing routes into OSPF, the scope of redistribution for the specified protocol.
Distribute-List The access list used to filter redistributed routes.

show ipv6 ospf abr

This command displays the internal OSPFv3 routes to reach Area Border Routers (ABR). This
command takes no options.
Format
show ipv6 ospf abr
Modes • Privileged EXEC
• User EXEC
Term Definition
Type The type of the route to the destination. It can be either:
• intra — Intra-area route
• inter — Inter-area route
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop.

show ipv6 ospf area

This command displays information about the area. The <areaid> identifies the OSPF area that
is being displayed.
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-57