Ip Pimsm Bsr-Border; Ip Pimsm Bsr-Candidate - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ip pimsm(Interface Config)
This command is used to administratively disable PIM-SM multicast routing mode on a particular
router interface.
Format
no ip pimsm
Mode Interface Config

ip pimsm bsr-border

Use this command to prevent bootstrap router (BSR) messages from being sent or received
through an interface.
Default disabled
Format
ip pimsm bsr-border
Mode Interface Config
no ip pimsm bsr-border
Use this command to disable the interface from being the BSR border.
Format
no ip pimsm bsr-border
Mode Interface Config

ip pimsm bsr-candidate

This command is used to configure the router to announce its candidacy as a bootstrap router
(BSR).
Default None
Format
ip pimsm bsr-candidate interface <unit/slot/port> [hash-mask-length]
[priority]
Mode Global Config
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
5-17