NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual page 215

Term Definition
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
System Describes the remote system by identifying the system name and versions of hardware,
Description
operating system, and networking software supported in the device.
Port Describes the port in an alpha-numeric format. The port description is configurable.
Description
System Indicates the primary function(s) of the device.
Capabilities
Supported
System Shows which of the supported system capabilities are enabled.
Capabilities
Enabled
Management For each interface on the remote device with an LLDP agent, lists the type of address the
Address
remote LLDP agent uses and specifies the address used to obtain information related to
the device.
Time To Live The amount of time (in seconds) the remote device's information received in the
LLDPDU should be treated as valid information.
Example: The following shows example CLI display output for the command.
(Switch) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-179