NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual page 28

Layer-3 managed stackable switch version 8.0

Hide thumbs Also See for GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch:

Table of Contents

This command configures a slot in the system. The <unit/slot> is the slot identifier of the

slot. The <cardindex> is the index into the database of the supported card types, indicating the

type of the card being preconfigured in the specified slot. The card index is a 32-bit integer. If a

card is currently present in the slot that is unconfigured, the configured information will be deleted

and the slot will be re-configured with default information for the card.

slot <unit/slot> <cardindex>

Global Config

Note: Card index can be obtained by executing show supported cardtype command in

User EXEC mode.

This command removes configured information from an existing slot in the system.

no slot <unit/slot> <cardindex>

Global Config

Note: Card index can be obtained by executing show supported cardtype command in

User EXEC mode.

set slot disable

This command configures the administrative mode of the slot(s). If you specify [all], the

command is applied to all slots, otherwise the command is applied to the slot identified by

<unit/slot>.

Stacking Commands

Managed Switch CLI Manual, Release 8.0

v1.0, July 2009

Chapters

Table of Contents