NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual page 570

Source
nvram:script
<scriptname>
nvram:startup-config
nvram:startup-config
nvram:traplog
system:running-config
<url>
<url>
<url>
<url>
(NETGEAR Switch CLI Routing) #copy tftp://1.1.1.1/file.scr nvram:script file.scr
noval
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
{image1 | image2}
Utility Commands
Destination
<url>
nvram:backup-config
<url>
<url>
nvram:startup-config
nvram:clibanner
nvram:Switch CLI.cfg
nvram:script
<destfilename>
nvram:script
<destfilename> noval
nvram:sshkey-dsa
nvram:sshkey-rsa1
nvram:sshkey-rsa2
nvram:sslpem-dhweak
nvram:sslpem-dhstrong Downloads an HTTP secure-server certificate.
nvram:sslpem-root
nvram:sslpem-server
nvram:startup-config
nvram:system-image
kernel
{image1 | image2}
<url>
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
Description
Copies a specified configuration script file to a server.
Copies the startup configuration to the backup
configuration.
Copies the startup configuration to a server.
Copies the trap log file to a server.
Saves the running configuration to nvram.
Downloads the CLI banner to the system.
Downloads the binary config file to the system.
Downloads a configuration script file to the system.
During the download of a configuration script, the copy
command validates the script. In case of any error, the
command lists all the lines at the end of the validation
process and prompts you to confirm before copying the
script file.
When you use this option, the copy command will not
validate the downloaded script file. An example of the
CLI command follows:
Downloads an SSH key file. For more information, see
"Secure Shell (SSH) Commands" on page
Downloads an SSH key file.
Downloads an SSH key file.
Downloads an HTTP secure-server certificate.
Downloads an HTTP secure-server certificate. For
more information, see "Hypertext Transfer Protocol
(HTTP) Commands" on page
Downloads an HTTP secure-server certificate.
Downloads the startup configuration file to the system.
Downloads a code image to the system.
Downloads a code file by xmodem, zmodem, or TFTP.
Download an image from the remote server to either
image. In a stacking environment, the downloaded
image is distributed to the stack nodes.
Upload either image to the remote server.
10-16.
10-20.
9-33