Show Ip Arp Inspection - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show ip arp inspection

Use this command to display the Dynamic ARP Inspection global configuration and configuration
on all the VLANs. With the vlan-list argument (i.e. comma separated VLAN ranges), the
command displays the global configuration and configuration on all the VLANs in the given
VLAN list. The global configuration includes the source mac validation, destination mac
validation and invalid IP validation information.
Format
show ip arp inspection [vlan <vlan-list>]
Mode • Privileged EXEC
• User EXEC
Term Definition
Source MAC Displays whether Source MAC Validation of ARP frame is enabled or disabled.
Validation
Destination Displays whether Destination MAC Validation is enabled or disabled.
MAC Validation
IP Address Displays whether IP Address Validation is enabled or disabled.
Validation
VLAN The VLAN ID for each displayed row.
Configuration Displays whether DAI is enabled or disabled on the VLAN.
Log Invalid Displays whether logging of invalid ARP packets is enabled on the VLAN.
ACL Name The ARP ACL Name, if configured on the VLAN.
Static Flag If the ARP ACL is configured static on the VLAN.
Example: The following shows example CLI display output for the command.
(Switch) #show ip arp inspection vlan 10-12
Source Mac Validation
Destination Mac Validation : Disabled
IP Address Validation
Vlan Configuration
---- -------------
10
11
12
Switching Commands
: Disabled
: Disabled
Log Invalid
-----------
Enabled Enabled
Disabled Enabled
Enabled Disabled
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
ACL Name Static flag
--------- ----------
H2 Enabled
3-136