Vlan Name; Vlan Participation - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

vlan name

This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1-4093.
Default • VLAN ID 1 - default
• other VLANS - blank string
Format
vlan name <1-4093> <name>
Mode VLAN Config
no vlan name
This command sets the name of a VLAN to a blank string.
Format
no vlan name <1-4093>
Mode VLAN Config

vlan participation

This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number.
Format
vlan participation {exclude | include | auto} <1-4093>
Mode Interface Config
Participation options are:
Participation
Definition
Options
include The interface is always a member of this VLAN. This is equivalent to registration fixed.
exclude The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The interface will not
participate in this VLAN unless a join request is received on this interface. This is
equivalent to registration normal.
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-34