no telnetcon timeout
This command sets the Telnet connection session timeout value to the default.
Note: Changing the timeout value for active sessions does not become effective until the
session is reaccessed. Also, any keystroke activates the new timeout duration.
Format
no telnetcon timeout
Mode
Privileged EXEC
show telnet
This command displays the current outbound Telnet settings. In other words, these settings apply
to Telnet connections initiated from the switch to a remote system.
Format
show telnet
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Outbound Telnet
The number of minutes an outbound Telnet session is allowed to remain inactive before
Login Timeout
being logged off.
Maximum
The number of simultaneous outbound Telnet connections allowed.
Number of
Outbound Telnet
Sessions
Allow New
Indicates whether outbound Telnet sessions will be allowed.
Outbound Telnet
Sessions
Management Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
10-15