Tacacs+ Commands - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0

TACACS+ Commands

TACACS+ provides access control for networked devices via one or more centralized servers.
Similar to RADIUS, this protocol simplifies authentication by making use of a single database that
can be shared by many clients on a large network. TACACS+ is based on the TACACS protocol
(described in RFC1492) but additionally provides for separate authentication, authorization, and
accounting services. The original protocol was UDP based with messages passed in clear text over
the network; TACACS+ uses TCP to ensure reliable delivery and a shared key configured on the
client and daemon server to encrypt all messages.
tacacs-server host
Use the tacacs-server host command in Global Configuration mode to configure a
TACACS+ server. This command enters into the TACACS+ configuration mode. The <ip-
address|hostname> parameter is the IP address or hostname of the TACACS+ server. To
specify multiple hosts, multiple tacacs-server host commands can be used.
Format
tacacs-server host <ip-address|hostname>
Mode Global Config
no tacacs-server host
Use the no tacacs-server host command to delete the specified hostname or IP address.
The <ip-address|hostname> parameter is the IP address of the TACACS+ server.
Format
no tacacs-server host <ip-address|hostname>
Mode Global Config
Management Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
10-67