Show Ipv6 Pimsm Bsr - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
PIM-SM Interface Status
Interface Valid unit, slot, and port number separated by forward slashes.
Interface-Mode Indicates whether PIM-SM is enabled or disabled on the interface.
Operational- The current state of the PIM-SM protocol on the interface. Possible values are Operational
Status or Non-Operational.

show ipv6 pimsm bsr

This command displays the bootstrap router (BSR) information. The output includes elected BSR
information and information about the locally configured candidate rendezvous point (RP)
advertisement.
Format
show ipv6 pimsm bsr
Mode • Privileged EXEC
• User EXEC
Term Definition
BSR Address IP address of the BSR.
Uptime Length of time that this router has been up (in hours, minutes, and seconds).
BSR Priority Priority as configured in the ip pimsm bsr-candidate command.
Hash Mask Length of a mask (maximum 32 bits) that is to be ANDed with the group address before the
Length hash function is called. This value is configured in the ip pimsm bsr-candidate
command.
Next Bootstrap Time (in hours, minutes, and seconds) in which the next bootstrap message is due from
Message In this BSR.
Next Candidate Time (in hours, minutes, and seconds) in which the next candidate RP advertisement will
RP be sent.
advertisement in
IPv6 Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
6-14