Ip Dhcp Bootp Automatic; Ip Dhcp Conflict Logging - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no service dhcp
This command disables the DHCP server.
Format
no service dhcp
Mode Global Config

ip dhcp bootp automatic

This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
Default disabled
Format
ip dhcp bootp automatic
Mode Global Config
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the
automatic address pool.
Format
no ip dhcp bootp automatic
Mode Global Config

ip dhcp conflict logging

This command enables conflict logging on DHCP server.
Default enabled
Format
ip dhcp conflict logging
Mode Global Config
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-50