Dos-Control All; Dos-Control Sipdip - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

dos-control all

This command enables Denial of Service protection checks globally.
Default disabled
Format
dos-control all
Mode Global Config
no dos-control all
This command disables Denial of Service prevention checks globally.
Format
no dos-control all
Mode Global Config

dos-control sipdip

This command enables Source IP address = Destination IP address (SIP=DIP) Denial of Service
protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If
packets ingress with SIP=DIP, the packets will be dropped if the mode is enabled.
Default disabled
Format
dos-control sipdip
Mode Global Config
no dos-control sipdip
This command disables Source IP address = Destination IP address (SIP=DIP) Denial of Service
prevention.
Format
no dos-control sipdip
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-193