Ip Igmp-Proxy Reset-Status; Show Ip Igmp-Proxy - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ip igmp-proxy unsolicit-rprt-interval
This command resets the unsolicited report interval of the IGMP Proxy router to the default value.
Format
no ip igmp-proxy unsolicit-rprt-interval
Mode Interface Config

ip igmp-proxy reset-status

This command resets the host interface status parameters of the IGMP Proxy router. This
command is valid only when you enable IGMP Proxy on the interface.
Format
ip igmp-proxy reset-status
Mode Interface Config

show ip igmp-proxy

This command displays a summary of the host interface status parameters. It displays the
following parameters only when you enable IGMP Proxy.
Format
show ip igmp-proxy
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface index The interface number of the IGMP Proxy.
Admin Mode States whether the IGMP Proxy is enabled or not. This is a configured value.
Operational States whether the IGMP Proxy is operationally enabled or not. This is a status
Mode
parameter.
Version The present IGMP host version that is operational on the proxy interface.
Number of The number of multicast groups that are associated with the IGMP Proxy interface.
Multicast Groups
Unsolicited The time interval at which the IGMP Proxy interface sends unsolicited group membership
Report Interval
report.
Querier IP The IP address of the Querier, if any, in the network attached to the upstream interface
Address on
(IGMP-Proxy interface).
Proxy Interface
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
5-36