Ipv6 Dhcp Pool; Domain-Name (Ipv) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

ipv6 dhcp pool

Use this command from Global Config mode to enter IPv6 DHCP Pool Config mode. Use the
exit command to return to Global Config mode. To return to the User EXEC mode, enter
CTRL+Z. The <pool-name> should be less than 31 alpha-numeric characters. DHCPv6 pools
are used to specify information for DHCPv6 server to distribute to DHCPv6 clients. These pools
are shared between multiple interfaces over which DHCPv6 server capabilities are configured.
Format
ipv6 dhcp pool <pool-name>
Mode Global Config
no ipv6 dhcp pool
This command removes the specified DHCPv6 pool.
Format
no ipv6 dhcp pool <pool-name>
Mode Global Config
domain-name (IPv6)
This command sets the DNS domain name which is provided to DHCPv6 client by DHCPv6
server. DNS domain name is configured for stateless server support. Domain name consist of no
more than 31 alpha-numeric characters. DHCPv6 pool can have multiple number of domain names
with maximum of 8.
no domain-name
Format
domain-name <dns-domain-name>
Mode IPv6 DHCP Pool Config
This command will remove dhcpv6 domain name from dhcpv6 pool.
Format
no domain-name <dns-domain-name>
Mode IPv6 DHCP Pool Config
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-71