no arp retries
This command configures the default ARP count of maximum request for retries.
Format
no arp retries
Mode
Global Config
arp timeout
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout
time in seconds. The range for <seconds> is between 15-21600 seconds.
Default
1200
Format
arp timeout <15-21600>
Mode
Global Config
no arp timeout
This command configures the default ARP entry ageout time.
Format
no arp timeout
Mode
Global Config
clear arp-cache
This command causes all ARP entries of type dynamic to be removed from the ARP cache. If the
gateway keyword is specified, the dynamic entries of type gateway are purged as well.
Format
clear arp-cache [gateway]
Mode
Privileged EXEC
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-5