Set Igmp Mrouter - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Format
set igmp mcrtrexpiretime <0-3600>
Mode • Global Config
• Interface Config
Format
set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode VLAN Config
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
Format
no set igmp mcrtrexpiretime
Mode • Global Config
• Interface Config
Format
no set igmp mcrtrexpiretime <vlan_id>
Mode VLAN Config

set igmp mrouter

This command configures the VLAN ID (<vlanId>) that has the multicast router mode enabled.
Format
set igmp mrouter <vlan_id>
Mode Interface Config
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan_id>).
Format
no set igmp mrouter <vlan_id>
Mode Interface Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-144