Ip Https Authentication; Ip Http Secure-Port - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ip http secure-session hard-timeout
This command resets the hard timeout for secure HTTP sessions to the default value.
Format
no ip http secure-session hard-timeout
Mode Privileged EXEC

ip https authentication

This command specifies the authentication methods for http server users. The additional methods
of authentication are used only if the previous method returns an error, not if it fails. To ensure that
the authentication succeeds even if all methods return an error, specify
the command line. If
none
authentication is used if the radius server is down..
Format
ip https authentication method1 [method2 ...]
Mode Global ConfigC
Term Definition
Local Uses the local username database for authentication.
Radius Uses the list of all RADIUS servers for authentication.
Tacacs Uses the list of all TACACS servers for authentication.
None Uses no authentication.
no ip https authentication
This command restores the authentication methods to the default for http server users.
Format
no ip https authentication method1 [method2 ...]
Mode Global Config

ip http secure-port

This command is used to set the SSL port where port can be 1-65535 and the default is port 443.
Default 443
Management Commands
is specified as an authentication method after
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
as the final method in
none
radius
, no
10-26