Redistribute (Rip) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Format
split-horizon {none | simple | poison}
Mode Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
Format
no split-horizon
Mode Router RIP Config

redistribute (RIP)

This command configures RIP protocol to redistribute routes from the specified source protocol/
routers. There are five possible match options. When you submit the command redistribute ospf
match <match-type> the match-type or types specified are added to any match types presently
being redistributed. Internal routes are redistributed by default.
Default • metric—not-configured
• match—internal
Format for
redistribute ospf [metric <0-15>] [match [internal] [external 1]
OSPF as
[external 2] [nssa-external 1] [nssa-external-2]]
source
protocol
Format for
redistribute {static | connected} [metric <0-15>]
other source
protocol
Mode Router RIP Config
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Format
no redistribute {ospf | static | connected} [metric] [match [internal]
[external 1] [external 2] [nssa-external 1] [nssa-external-2]]
Mode Router RIP Config
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-88