Show Ip Dhcp Snooping Database - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
MAC Address Displays the MAC address for the binding that was added. The MAC address is the key
to the binding database.
IP Address Displays the valid IP address for the binding rule.
VLAN The VLAN for the binding rule.
Interface The interface to add a binding into the DHCP snooping interface.
Type Binding type; statically configured from the CLI or dynamically learned.
Lease (sec) The remaining lease time for the entry.
Example: The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping binding
Total number of bindings: 2
MAC Address
------------------
00:02:B3:06:60:80
00:0F:FE:00:13:04

show ip dhcp snooping database

Use this command to display the DHCP Snooping configuration related to the database
persistency.
Format
show ip dhcp snooping database
Mode • Privileged EXEC
• User EXEC
Term Definition
Agent URL Bindings database agent URL.
Write Delay The maximum write time to wrte the database into local or remote.
Example: The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping database
Switching Commands
IP Address VLAN
------------ ----
210.1.1.3 10
210.1.1.4 10
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
Interface Type Lease (Secs)
--------- ---- -------------
0/1 86400
0/1 86400
3-127