Captive Portal Configuration Commands; Configuration (Captive Portal) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
The number of active captive portal instances.
Active Captive
Portals
System Supported The maximum number of user can be authenticated.
Users
The maximum number of local user can be created.
Local Supported
Users
The number of the authenticated users.
Authenticated
Users
Example
(switch)#show captive-portal status
Additional HTTP Port........................... 0
Additional HTTP Secure Port.................... 0
Peer Switch Statistics Reporting Interval...... 120
Authentication Timeout......................... 300
Supported Captive Portals...................... 10
Configured Captive Portals..................... 1
Active Captive Portals......................... 0
System Supported Users......................... 1024
Local Supported Users.......................... 128
Authenticated Users............................ 0

Captive Portal Configuration Commands

The commands in this section are related to captive portal configurations.

configuration (Captive Portal)

Use this command to enter the captive portal instance mode. The captive portal configuration
identified by CP ID 1 is the default CP configuration. The system supports a total of ten CP
configurations.
Format
configuration <1-10>
Mode Captive Portal Configuration mode
Captive Portal Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
12-5