NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual page 468

Format
show ipv6 ospf area <areaid>
Modes • Privileged EXEC
• User EXEC
Term Definition
AreaID The area id of the requested OSPF area.
External A number representing the external routing capabilities for this area.
Routing
Spf Runs The number of times that the intra-area route table has been calculated using this area's
link-state database.
Area Border The total number of area border routers reachable within this area.
Router Count
Area LSA Count Total number of link-state advertisements in this area's link-state database, excluding AS
External LSAs.
Area LSA A number representing the Area LSA Checksum for the specified AreaID excluding the
Checksum
external (LS type 5) link-state advertisements.
Stub Mode Represents whether the specified Area is a stub area or not. The possible values are
enabled and disabled. This is a configured value.
Import Shows whether to import summary LSAs (enabled).
Summary LSAs
OSPF Stub The metric value of the stub area. This field displays only if the area is a configured as a
Metric Value
stub area.
The following OSPF NSSA specific information displays only if the area is configured as an
NSSA.
Term Definition
Import Shows whether to import summary LSAs into the NSSA.
Summary LSAs
Redistribute Shows whether to redistribute information into the NSSA.
into NSSA
Default Shows whether to advertise a default route into the NSSA.
Information
Originate
Default Metric The metric value for the default route advertised into the NSSA.
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-58