Dns Client Commands; Show Ip Dhcp Conflict; Ip Domain Lookup - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show ip dhcp conflict

This command displays address conflicts logged by the DHCP Server. If no IP address is specified,
all the conflicting addresses are displayed.
Format
show ip dhcp conflict [<ip-address>]
Modes • Privileged EXEC
• User EXEC
Term Definition
IP address The IP address of the host as recorded on the DHCP server.
The manner in which the IP address of the hosts were found on the DHCP
Detection
Server
Method
Detection time The time when the conflict was found.

DNS Client Commands

These commands are used in the Domain Name System (DNS), an Internet directory service. DNS
is how domain names are translated into IP addresses. When enabled, the DNS client provides a
hostname lookup service to other components.

ip domain lookup

Use this command to enable the DNS client.
Default enabled
Format
ip domain lookup
Mode Global Config
no ip domain lookup
Use this command to disable the DNS client.
Format
no ip domain lookup
Mode Global Config
Utility Commands
.
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
9-55