View Lldp-Med Remote Device Information - NETGEAR M7100 Series User Manual

Table 48. LDP-MED Local Device Information (continued)
Field
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
Location Information: Specifies if location TLV is present in LLDP frames.
Sub Type
Location Information

View LLDP-MED Remote Device Information


To view LLDP-MED remote device information:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > LLDP > LLDP-MED > Remote Device Information.
7.
M6100, M5300, and M7100 Series Managed Switches
Description
Specifies Firmware version.
Specifies Software version.
Specifies serial number.
Specifies manufacturers name.
Specifies model name.
Specifies asset ID.
Specifies type of location information.
The location information as a string for given type of location ID.
Configure System Information
140