Show Logging Buffered; Show Logging Hosts - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Console Logging The minimum severity to log to the console log. Messages with an equal or lower
Severity Filter
numerical severity are logged.
Buffered Shows whether buffered logging is enabled.
Logging
Syslog Logging Shows whether syslog logging is enabled.
Log Messages Number of messages received by the log process. This includes messages that are
Received
dropped or ignored.
Log Messages Number of messages that could not be processed due to error or lack of resources.
Dropped
Log Messages Number of messages sent to the collector/relay.
Relayed

show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
show logging buffered
Mode Privileged EXEC
Term Definition
Buffered (In- Shows whether the In-Memory log is enabled or disabled.
Memory)
Logging
Buffered The behavior of the In Memory log when faced with a log full situation.
Logging
Wrapping
Behavior
Buffered Log The count of valid entries in the buffered log.
Count

show logging hosts

This command displays all configured logging hosts. The <unit> is the switch identifier and has
a range of 1-8.
Format
show logging hosts <unit>
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-22