Show Supported Cardtype - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Pluggable Cards are pluggable or non-pluggable in the slot.
Power Down Indicates whether the slot can be powered down.
If you supply a value for <unit/slot>, the following additional information appears:
Term Definition
Inserted Card The model identifier of the card inserted in the slot. Model Identifier is a 32-character
Model Identifier
field used to identify a card. This field is displayed only if the slot is full.
Inserted Card The card description. This field is displayed only if the slot is full.
Description
Configured Card The card description of the card preconfigured in the slot.
Description

show supported cardtype

This commands displays information about all card types or specific card types supported in the
system.
Format
show supported cardtype [<cardindex>]
Mode User EXEC
If you do not supply a value for <cardindex>, the following output appears:
Term Definition
Card Index (CID) The index into the database of the supported card types. This index is used when
preconfiguring a slot.
Card Model The model identifier for the supported card type.
Identifier
If you supply a value for <cardindex>, the following output appears:
Term Definition
Card Type The 32-bit numeric card type for the supported card.
Model Identifier The model identifier for the supported card type.
Card Description The description for the supported card type.
Stacking Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
2-7