Show Ip Rip; Show Ip Rip Interface Brief - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show ip rip

This command displays information relevant to the RIP router.
Format
show ip rip
Modes • Privileged EXEC
• User EXEC
Term Definition
RIP Admin Mode Enable or disable.
Split Horizon None, simple or poison reverse.
Mode
Auto Summary Enable or disable. If enabled, groups of adjacent routes are summarized into single
Mode
entries, in order to reduce the total number of entries The default is enable.
Host Routes Enable or disable. If enabled the router accepts host routes. The default is enable.
Accept Mode
Global Route The number of route changes made to the IP Route Database by RIP. This does not
Changes
include the refresh of a route's age.
Global queries The number of responses sent to RIP queries from other systems.
Default Metric The default metric of redistributed routes if one has already been set, or blank if not
configured earlier. The valid values are 1 to 15.
Default Route The default route.
Advertise

show ip rip interface brief

This command displays general information for each RIP interface. For this command to display
successful results routing must be enabled per interface (i.e., ip rip).
Format
show ip rip interface brief
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Valid unit, slot, and port number separated by forward slashes.
IP Address The IP source address used by the specified RIP interface.
Send Version The RIP version(s) used when sending updates on the specified interface. The types are
none, RIP-1, RIP-1c, RIP-2
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-89