Area Stub No-Summary (Ospf); Area Virtual-Link (Ospf) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

area stub no-summary (OSPF)

This command configures the Summary LSA mode for the stub area identified by <areaid>.
Use this command to prevent LSA Summaries from being sent.
Default disabled
Format
area <areaid> stub no-summary
Mode Router OSPF Config
no area stub no-summary
This command configures the default Summary LSA mode for the stub area identified by
<areaid>.
Format
no area <areaid> stub no-summary
Mode Router OSPF Config

area virtual-link (OSPF)

This command creates the OSPF virtual interface for the specified <areaid> and
<neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Format
area <areaid> virtual-link <neighbor>
Mode Router OSPF Config
no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by
<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Format
no area <areaid> virtual-link <neighbor>
Mode Router OSPF Config
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-46