Show Ip Pimdm; Show Ip Pimdm Interface - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ip pimdm hello-interval
This command resets the transmission frequency of hello messages between PIM enabled
neighbors to the default value.
Format
no ip pimdm hello-interval
Mode Interface Config

show ip pimdm

This command displays the system-wide information for PIM-DM.
Format
show ip pimdm
Modes • Privileged EXEC
• User EXEC
Term Definition
Admin Mode Indicates whether PIM-DM is enabled or disabled.
Interface Valid unit, slot, and port number separated by forward slashes.
Interface-Mode Indicates whether PIM-DM is enabled or disabled on this interface.
Operational- The current state of PIM-DM on this interface. Possible values are Operational or Non-
status
Operational.

show ip pimdm interface

This command displays the interface information for PIM-DM on the specified interface.
Format
show ip pimdm interface <unit/slot/port>
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Mode Indicates whether PIM-DM is enabled or disabled on the specified interface.
Hello Interval The frequency at which PIM hello messages are transmitted on this interface. By default,
the value is 30 seconds.
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
5-14