Debug Ip Acl; Debug Ip Dvmrp Packet - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Parameter Definition
Group Multicast group address in the IGMP header.
no debug igmpsnooping receive
This command disables tracing of received IGMP Snooping packets.
Format
no debug igmpsnooping receive
Mode Privileged EXEC

debug ip acl

Use this command to enable debug of IP Protocol packets matching the ACL criteria.
Default disabled
Format
debug ip acl <acl Number>
Mode Privileged EXEC
no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
Format
no debug ip acl <acl Number>
Mode Privileged EXEC

debug ip dvmrp packet

Use this command to trace DVMRP packet reception and transmission. receive traces only
received DVMRP packets and transmit traces only transmitted DVMRP packets. When neither
keyword is used in the command, then all DVMRP packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console
Default disabled
Format
debug ip dvmrp packet [receive|transmit]
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-68