Interface (Captive Portal) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Format
no idle-timeout
Mode Captive Portal Instance mode
locale
This command is not intended to be a user command. The administrator must use the WEB UI to
create and customize captive portal web content. This command is primarily used by the show
running-config command and process as it provides the ability to save and restore configurations
using a text based format.
Default 1
Format
locale
Mode Captive Portal Instance mode
no locale
This command is intended to delete a locale. The default locale cannot be deleted.
Format
no locale
Mode Captive Portal Instance mode

interface (Captive Portal)

Use this command to associate an interface with a captive portal configuration.
Format
interface <unit/slot/port>
Mode Captive Portal Instance Config mode
no interface
Use this command to remove an association with a captive portal configuration.
Captive Portal Commands
<1-5>
<1-5>
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
12-13