Show Ip Vrrp - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Invalid Type The total number of VRRP packets received by the virtual router with invalid 'type' field.
Packets
Received
Address List The total number of VRRP packets received for which address list does not match the
Errors
locally configured list for the virtual router.
Invalid The total number of VRRP packets received with unknown authentication type.
Authentication
Type
Authentication The total number of VRRP advertisements received for which 'auth type' not equal to
Type Mismatch
locally configured one for this virtual router.
Packet Length The total number of VRRP packets received with packet length less than length of VRRP
Errors
header.

show ip vrrp

This command displays whether VRRP functionality is enabled or disabled on the switch. It also
displays some global parameters which are required for monitoring. This command takes no
options.
Format
show ip vrrp
Modes • Privileged EXEC
• User EXEC
Term Definition
Admin Mode The administrative mode for VRRP functionality on the switch.
Router The total number of VRRP packets received with an invalid VRRP checksum value.
Checksum
Errors
Router Version The total number of VRRP packets received with Unknown or unsupported version
Errors
number.
Router VRID The total number of VRRP packets received with invalid VRID for this virtual router.
Errors
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-32