Area Nssa Translator-Role (Ospf); Area Nssa Translator-Stab-Intv (Ospf) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

area nssa translator-role (OSPF)

This command configures the translator role of the NSSA. A value of always causes the router to
assume the role of the translator the instant it becomes a border router and a value of candidate
causes the router to participate in the translator election process when it attains border router
status.
Format
area <areaid> nssa translator-role {always | candidate}
Mode Router OSPF Config
no area nssa translator-role (OSPF)
This command disables the nssa translator role from the specified area id.
Format
no area <areaid> nssa translator-role {always | candidate}
Mode Router OSPF Config

area nssa translator-stab-intv (OSPF)

This command configures the translator <stabilityinterval> of the NSSA. The
<stabilityinterval> is the period of time that an elected translator continues to perform its
duties after it determines that its translator status has been deposed by another router.
Format
area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode Router OSPF Config
no area nssa translator-stab-intv (OSPF)
This command disables the nssa translator's <stabilityinterval> from the specified area
id.
Format
no area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode Router OSPF Config
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-44