NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual page 411

The IPv6 commands described in this chapter are standard on the GSM7328Sv2 and
GSM7352Sv2, but are optional on the GSM7328Sv1 and GSM7352Sv1. In order to use these
commands with the GS7328Sv1 or GSM7352Sv1 you must purchase a separate software license.
Note: The commands in this chapter require an optional software license for use on the
GSM7328Sv1 and GSM7352Sv1.
Note: The commands in this chapter are in one of three functional groups:
This chapter contains the following sections:
• "IPv6 Management Commands" on page 7-2
• "Tunnel Interface Commands" on page 7-6
• "Loopback Interface Commands" on page 7-8
• "IPv6 Routing Commands" on page 7-10
• "OSPFv3 Commands" on page 7-33
• "DHCPv6 Commands" on page 7-68
Note: The commands in this chapter are in one of three functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
• Clear commands clear some or all of the settings to factory defaults.
v1.0, July 2009
Chapter 7
IPv6 Commands
7-1