Addport; Deleteport (Interface Config); Deleteport (Global Config) - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

12.1.1 addport

This command adds one port to the port-channel (LAG). The first interface is a logical
unit, slot and port number of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port.
Format
Mode

12.1.2 deleteport (Interface Config)

This command deletes the port from the port-channel (LAG). The interface is a logical slot
and port number of a configured port-channel.
Format
Mode

12.1.3 deleteport (Global Config)

This command deletes all configured ports from the port-channel (LAG). The interface is
a logical slot and port number of a configured port-channel.
Format
Mode
12-2
For more information, see
addport <logical slot/port>
Interface Config
deleteport <logical slot/port>
Interface Config
deleteport {<logical slot/port> | all}
Global Config
v1.0, December 2005
Section 4.1.8 "speed" on page
Port-Channel/LAG (802.3ad) Commands
4-4.