Port-Channel Name; Port-Channel Linktrap - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
12.1.9.1 no port-channel adminmode
This command disables a port-channel (LAG). The option
channel with the same administrative mode setting.
Format
Mode

12.1.10 port-channel name

This command defines a name for the port-channel (LAG). The interface is a logical slot/
port for a configured port-channel, and
characters.
Format
Mode

12.1.11 port-channel linktrap

This command enables link trap notifications for the port-channel (LAG). The interface is
a logical slot/port for a configured port-channel. The option
port-channel with the same administrative mode setting.
Default
Format
Mode
12.1.11.1 no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is
a logical slot and port for a configured port-channel. The option
port-channel with the same administrative mode setting.
Format
Mode
Port-Channel/LAG (802.3ad) Commands
no port-channel adminmode [all]
Global Config
is an alphanumeric string up to 15
<name>
port-channel name {<logical slot/port> | all |
<name>}
Global Config
enabled
port-channel linktrap {<logical slot/port> | all}
Global Config
no port-channel linktrap {<logical slot/port> |
all}
Global Config
v1.0, December 2005
sets every configured port-
all
sets every configured
all
sets every configured
all
12-5