NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual page 103

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Root Port
Identifier
Root Port Max
Age
Root Port Bridge
Forward Delay
Hello Time
Bridge Hold Time
Bridge Max Hops
CST Regional
Root
Regional Root
Path Cost
Associated FIDs
Associated
VLANs
When you include the
the bridge and the following information appears.
Bridge Priority
Bridge Identifier
Bridge Max Age
Bridge Max Hops
Bridge Hello
Time
Bridge Forward
Delay
Bridge Hold Time
Spanning Tree Protocol Commands
Identifier of the port to access the Designated Root for the
CST.
Derived value.
Derived value.
Configured value of the parameter for the CST.
Minimum time between transmission of Configuration
Bridge Protocol Data Units (BPDUs)
Bridge max-hops count for the device.
Bridge Identifier of the CST Regional Root. It is made up
using the bridge priority and the base MAC address of the
bridge.
Path Cost to the CST Regional Root.
List of forwarding database identifiers currently associated
with this instance.
List of VLAN IDs currently associated with this instance.
keyword, this command displays spanning tree settings for
brief
Configured value.
The bridge identifier for the selected MST instance. It is
made up using the bridge priority and the base MAC address
of the bridge.
Configured value.
Bridge max-hops count for the device.
Configured value.
Configured value.
Minimum time between transmission of Configuration
Bridge Protocol Data Units (BPDUs)
v1.0, December 2005
5-11