Vlan Name; Vlan Participation - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

6.1.7 vlan name

This command changes the name of a VLAN. The name is an alphanumeric string of up to
32 characters, and the ID is a valid VLAN identification number. ID range is 1-4094.
Default
Format
Mode
6.1.7.1 no vlan name
This command sets the name of a VLAN to a blank string.
Format
Mode

6.1.8 vlan participation

This command configures the degree of participation for a specific interface in a VLAN.
The ID is a valid VLAN identification number, and the interface is a valid interface
number
.
Format
Mode
Participation options are:
include
exclude
auto
6-4
VLAN ID 1 - default; other VLANS - blank string
vlan name <2-4094> <name>
VLAN Config
no vlan name <2-4094>
VLAN Config
vlan participation {exclude | include | auto} <1-
4094>
Interface Config
The interface is always a member of this VLAN. This is
equivalent to registration fixed.
The interface is never a member of this VLAN. This is equiv-
alent to registration forbidden.
The interface is dynamically registered in this VLAN by
GVRP. The interface will not participate in this VLAN unless
a join request is received on this interface. This is equivalent
to registration normal.
v1.0, December 2005
VLAN Commands