Show Port-Security; Show Port-Security Dynamic; Show Port-Security Static - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

9.1.6 show port-security

This command displays the port-security settings for the entire system.
Format
Mode
Admin Mode
9.1.7 show port-security
This command displays the port-security settings for a particular interface or all interfaces.
Format
Mode
Interface Admin
Mode
Dynamic Limit
Static Limit
Violation Trap
Mode

9.1.8 show port-security dynamic

This command displays the dynamically locked MAC addresses for port.
Format
Mode
MAC Address

9.1.9 show port-security static

This command displays the statically locked MAC addresses for port.
Format
Mode
MAC Address
9-4
show port-security
Privileged EXEC
Port Locking mode for the entire system
show port-security <interface | all>
Privileged EXEC
Port Locking mode for the Interface.
Maximum dynamically allocated MAC Addresses.
Maximum statically allocated MAC Addresses.
Whether violation traps are enabled.
show port-security dynamic <interface>
Privileged EXEC
MAC Address of dynamically locked MAC.
show port-security static <interface>
Privileged EXEC
MAC Address of statically locked MAC.
v1.0, December 2005
Port-Based Traffic Control Commands