Macfilter Addsrc All; Bridge Aging-Time - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
4.5.6.1 no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC
address of
<macaddr>
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode

4.5.7 macfilter addsrc all

This command adds all interfaces to the source filter set for the MAC filter with the MAC
address of
<macaddr>
byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
must identify a valid VLAN.
Format
Mode
4.5.7.1 no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the
MAC address of
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode

4.5.8 bridge aging-time

This command configures the forwarding database address aging timeout in seconds. In an
IVL system, the
Default
Format
Mode
Seconds
4-18
and VLAN of
parameter must identify a valid VLAN.
no macfilter addsrc <macaddr> <vlanid>
Interface Config
and . You must specify the
<vlanid>
macfilter addsrc {all | <macaddr> <vlanid>}
Global Config
and VLAN of
<macaddr>
parameter must identify a valid VLAN.
no macfilter addsrc {all | <macaddr> <vlanid>}
Global Config
parameter is required.
[fdbid | all]
300
bridge aging-time <10-1,000,000> [fdbid | all]
Global Config
The
<seconds>
1,000,000 seconds.
v1.0, December 2005
. The
<vlanid> <macaddr>
. You must specify the
<vlanid>
parameter must be within the range of 10 to
Port and System Setup Commands
parameter must be
parameter as a 6-
<macaddr>
parameter
<vlanid>
<macaddr>