Show Ip Pimdm Interface; Show Ip Pimdm Interface Stats; Show Ip Pimdm Neighbor - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

15.3.5 show ip pimdm interface

This command displays the interface information for PIM-DM on the specified interface.
Format
Modes
Interface Mode
PIM-DM Interface
Hello Interval

15.3.6 show ip pimdm interface stats

This command displays the statistical information for PIM-DM on the specified interface.
Format
Modes
Interface
IP Address
Nbr Count
Hello Interval
Designated
Router

15.3.7 show ip pimdm neighbor

This command displays the neighbor information for PIM-DM on the specified interface.
Format
Modes
Neighbor
Address
Interface
IP Multicast Commands
show ip pimdm interface <slot/port>
Privileged EXEC
User EXEC
This field indicates whether PIM-DM is enabled or disabled
on the specified interface.
The frequency at which PIM hello messages are transmitted
on this interface. By default, the value is 30 seconds.
show ip pimdm interface stats {<slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The IP Address that represents the PIM-DM interface.
The neighbor count for the PIM-DM interface.
The time interval between two hello messages sent from the
router on the given interface.
The IP Address of the Designated Router for this interface.
show ip pimdm neighbor {<slot/port> | all}
Privileged EXEC
User EXEC
The IP Address of the neighbor on an interface.
Valid slot and port number separated by forward slashes.
v1.0, December 2005
15-19